Dr Boat Heavy Duty Repair Kit for Boat Kayak, Canoe, Tent, Inflatables, Swimming Pool, Hot Tub - LIQUID PATCH Resistant to Fresh and Salt Water UV-Resistant Long-lasting - 40ML

Product Information

Open the tube with glue-sealant and apply a thick layer to the damage site, grasping the areas 10 - 15 mm around the damage. Heavy Duty Repair Kit for Boat Kayak Canoe Tent Inflatables Swimming Pool Hot Tub LIQUID PATCH Resistant to Fresh and Salt water, UV-resistant, long-lasting Adhesive-Sealant DR. B. as adhesives are ‘contact’ adhesives then it is important to position the patch correctly as it will not be possible to re- position once in place).

Dr Boat Heavy Duty Repair Kit for Boat Kayak, Canoe, Tent

It is recommended for repair of inflatable boats, mattresses, water attractions, trampolines, swimming pools, as well as frame products made of PVC fabric (awnings, tents). Adhesives and solvents produce fumes which can be damaging to your health when inhaled, absorbed through the skin/eyes or ingested. It is important to remove any excess adhesive as if this remains on the surface of your tubes it will turn an unsightly brown!Liquid Patch is Elastic, Durable and more secure comparing to traditional repair methods Great for repairing punctures and cuts for boats, awnings, swimming pools, mattresses, boots, gymnastic balls and so on Heavy Duty Formula Suitable For Professional use: Sailing and Water Sports; Hot Tub Repair; Gym Equipment Repair. If the tear is greater than 50mm then, using a brush, apply a thin, even coat of adhesive to the back of one of the patches and to the inner tube surface around the repair area.

Boat Repair Kit with PVC Patches Set Accessory for VGEBY 3Pcs Boat Repair Kit with PVC Patches Set Accessory for

Leave to dry for at least 20 minutes, apply a second coat leaving it to dry for 2 minutes or until tacky. Clean/prime the back of the patch and the repair area, using a clean dry lint-free cloth, by wiping with MEK solvent or acetone.Allow a 2-3mm gap around the pencil/removable marker line to allow for some stretch in the patch when applied. Using a brush applicator apply an even thin coat of adhesive to both the back of the external tube patch and the masked repair area. After 15 - 30 minutes (depending on the ambient temperature), re-apply a thick layer of glue-sealant.

DR BOAT LIQUID Patch Glue Repair Kit Hot Tub Boat Kayak

Insert the rolled-up, polythene covered, repair patch into the tube through the tear or cut in the tube.

Cut a fabric patch (two if the tear is greater than 50mm) with rounded corners, allowing a minimum 5cm overlap around the hole/tear. Repair and sealing of punctures and cuts in inflatable products made of PVC, PU and rubberized fabrics.